Lotus fiber basket

On By CarynIn Craft

On our five-day road trip I spent time in the car twining and nålbinding a small oval basket from the lotus fiber that I hackled before we left. Once I had an oval shape for the base by adding increases only to the curves, I stopped increasing to build the walls.

Photo description: nålbound oval made from lotus fiber and an Oslo stitch , small section of sponge tucked into my ring because damp fingers twine plant material better
Photo description: tiny lotus fiber fragments everywhere as I twine

Even though I hackled the fiber and removed many of the shorter fibers, the lotus had more and there bits everywhere. The fibers are hair-like and itchy. Luckily I keep a lint roller in the car because I had to use it before every stop.

Photo description: final row before tightening the stitches
Photo description: final row after tightening the last three stitches and adding a couple simple loops to taper it down

To finish the basket I wrapped the twine around the top rim twice to give the edge more strength.

Photo description: finished basket with the cherry wool nål I used for stitching

The basket had a bias twist and was a little wonky, but sturdier than I expected.

Photo description: the basket twisted without anything to hold it open

When we got home, I gave the basket a plain water soak and the twist relaxed, making quite a nice little container once it was dry.

Photo description: finished basket after blocking

This project took me roughly 18 hours, but it was very satisfying to twine for a while then stitch for a while. I was originally thinking to make this into a base for a project bag, but since it holds shape, I think I will keep it as a small basket.