Throwback Thursday: wire basket

On By CarynIn Craft, throwback

In July 2015 I was making custom wire baskets for a shelving unit in the house. I would draw out the size needed in chalk on the patio, flatten out 1/2” welded wire hardware cloth, and cut it with metal snips.

Photo description: basket pattern drawn on the patio in pink chalk
Photo description: hardware cloth cut into shape

When I cut the hardware cloth, I left one side of the corner seam with a vertical wire, and the other side with horizontal wires free for a half inch. When I folded the sides up, I used needle nose pliers to loop the horizontal ends around the vertical wire.

Photo description: close up of corner cut showing the free horizontal ends and the solid vertical edge
Photo description: close up of how the wire ends wrap around to secure the sides of the basket
Photo description: finished basket with hanger wire used to stabilize the upper edge of the basket
Photo description: nine wire baskets of various sizes

I experimented with ways to keep the hardware cloth from scraping the wood shelf. I sewed fabric to corners as one solution, and ran hanger wire on the bottom like sled runners on other baskets.