Because this cracks me up.
We do have some real fall color, where people have planted maple trees in town.
Happy Fall from Texas
Spinning and spinning
My podiatrist said that bicycling or using an elliptical would be acceptable for exercise while my tendon is healing. We have an old mini bike that I set up in front of a stool and I can pedal while leaving my hands free to spin yarn! Not as nice as walking outside, but a good podcast makes it a little better. I do switch sides where my drop spindle hangs to balance out, since I can’t hang it straight down. If left to my own devices I will craft and not exercise, so this gets me to actually get some workout in.
Boot of shame
So I feel the “boot”, which is placed on humans to help healing for foot issues, is akin to the Elizabethan collar or “cone of shame” for dogs. Something done for our own good, but which is dreadfully embarrassing to wear. Yes, I have to wear a boot. I injured my Achilles tendon, but continued to walk on it for two months, so really it is just desserts. Doesn’t mean I have to like it. And there are things that still must be done. Like going out to tend chickens. For that, I wrapped the boot in a garbage bag to avoid getting muck on it. The hens were not impressed and are quite wary of my giant black limb.
I also just started back into lathe work. A boot full of wood shavings is a terrible thing; the flakes stick to the neoprene fabric like Velcro and once inside are terribly itchy. So I sewed a large fabric bag out of an old drop cloth and added a pull string closure. Before making saw dust, I pull this over my boot to protect it. Running the sewing machine with my left foot was an interesting experience, by the way (I do take the boot off to drive, doc said it was OK, so that is something).
The worst bit is no walks. Which means I can’t spin yarn and walk. For a month. <twitch> Doc says I can bicycle or use an elliptical machine. OK. Now to figure out how to spin and do that. Hm.
Lathe
My lathe is up and running! My husband got a new hammer drill to make the drop-in anchor holes in the concrete slab, and bolted down the lathe in the garage so it can be used. Joy! Now I have to relearn how to use it. The first two attempts were very frustrating, and resulted in two broken spindles. After consulting the schematics, it turns out my tool rest support was upside down (cue forehead slap), which meant the tool rest couldn’t get close to the surface, which increased the chatter and force applied to the wood as it spun. That fixed, I was able to turn an OK spindle, but the proportions were not to my liking. I had made the neck thicker to help avoid breakage there, but made the head wider as well, which made it hard to flick into motion. Attempt four proved again disastrous and the spindle broke on the lathe. Well, I had the tension too tight with the center supports and put undue pressure on the wood. Attempt five went better. My chisels could rest close to the work, the wood was balanced better in the supports, and I switched to sand paper when I started getting nervous about the diameter of the neck. I am not comfortable parting the work on the lathe, so cut the support ends off with the spindle off the machine and finished the tips on my band sander. I used my favorite spindle as a guide, but need to work on my precision as my finished dimensions were not the same (honestly I eye-balled it, I do have rulers and gauges to make the process of reproduction consistent).
I’m very excited to be back to wood work!
Pumpkin set up
We set one of the pumpkins out in the back woods, with some holes carved for wildlife access, then setup the trail cam to see if any thing came to eat the pumpkin. I sort of forgot about checking it for awhile and when I did go out, I found the camera knocked over lens down, and the pumpkin whole, but all the seeds gone.
I checked the memory card and there was only one photo of a critter. I believe this is a picture of the back of a raccoon headed toward the pumpkin. Or maybe a possum, but it would be one of the big possums. Maybe the beastie took exception to having pictures taken, or was looking for more seeds when it knocked the camera over. Bummer.
