Photo description: One the left a rosewood ring distaff dressed with blended wool and a handkerchief, on the right a custom 3D printed drop spindle with a small amount of spun yarn.
The test of the new 3D printed spindle went well. I dressed my distaff with a locally obtained wool blend and took my new spindle for a walk. I dropped it twice on the asphalt to no ill effect. Hurray! This is the first time I’ve used this distaff for wool; I figured out how to use it when I needed to control flax roving, and it works just as well for wool. I’ve seen others wrap their wool roving around the distaff, which for me is maddening. As I draft, the fibers pull tight and lock in a spiral. By laying the wool out parallel to the distaff in small sections, and securing it with a handkerchief and cord, the fibers drafted easily off the bottom of the bundle. Nice.
I ran an experiment with my sister. I decorated a card with Frixion pens, markers, and highlighters, then “erased” it by ironing. The way Frixion ink erases is by heat; when you use the little eraser it creates friction with the paper and generates enough heat to deactivate the ink color. Neat. The super cool science geeky part is that if you freeze the paper, the ink reactivates. I tested the card in my own freezer, then heated it again. I’m not sure how many times the ink can be cycled, but I know it is over four (that is how many times I’ve tested it previously before getting distracted). The colors fade slightly in the first cycle, but not much in subsequent activations.
Photo description: white card with floral designs, half erased, on an ironing board with the edge of the iron in view.Photo description: Blank white card, with the erased design barely visible.Photo description: Back of card, with “Put in freezer” written in regular ink.
Since the markings don’t erase completely (there are shadows and indents), I did a little misdirection and wrote the instructions on the back of the card. I put it in an envelope and mailed it to my sister. She reported back that it worked! I will have to wait until next summer to send another one; having the card sit in a freezing cold mail box would defeat the trick.
I probably get a bigger kick out of this than is normal for an adult.
I’m still picking away at the model 27 sewing machine, removing small bits of dried on oil and dirt.
Photo description: Singer Manufacturing Company trademark in bronze, covered with a thick patina of oilPhoto description: Same seal after cleaning with a bamboo stick and sewing machine oil, with only a slight patina left in the crevices. Photo also shows a shiny stitch regulator knob.
My friends and family are probably getting tired of hearing a “scritch, scritch” noise when I’m on the phone. But it helps me focus. I’m not cleaning all the patina off; getting it back on in artful amounts can take years. I did figure out that I can clean the parts that are stuck in place, and continue to soak them in oil until the threads release. A thin strip of nylon netting is great for getting into the screw threads.
Photo description: Top of the machine, one hand is holding a dirty length of nylon netting along the threads of the pressure foot tension knob.
I’m not sure what I am going to do about the gold decals. They are quite delicate and are already flaked off to the silver base, or rubbed off entirely in areas. I do feel I need to remove all the loose paint, because I don’t want it flaking off onto my fabric. Experiments continue.
Photo description: Clockwise from top left: “Bamboo Top” card which reads “Developed in China, plant based, made from the leaves and interior”, single spun yarn on a paper bobbin, 2-ply yarn, swatch woven on a Clover mini loom with 3 selvages, crocheted lace round, knitted rectangle, unspun fiber in a paper box.
Spinning my bamboo sample was very enjoyable. The fiber is soft, and the staple is a nice length. I did have some static issues, but those that were resolved with a spritz of water. I spun the singles on a drop spindle, and I kept the fiber and spindle in my purse to spin during waiting times. I made the two ply yarn from a center-pull ball using the same spindle. The fiber has a beautiful luster.
Photo description: A hand holding a single spun bamboo yarn wrapped nostepinne style on a 3D printed spindle.
Critters and Craft 