Tag: antique spinning wheel

Great Wheel Double Nut

On By CarynIn Craft

The Double Nut New England Great Wheel is called a “double nut” because of the two wooden nuts on the wood screw that allows for adjustment of the position of the spindle post.

Photo description: close up photo of the double nut assembly for the spindle post of a New England Great Wheel. The cork in the table is used to protect passers-by from the iron spindle when not in use. I just put it there so I didn’t lose it.

To increase the tension on the drive band that runs on the outside of the wheel, the spindle post can be moved farther away by backing off the left nut, and tightening the right nut. A properly tensioned drive band on a well-aligned wheel will keep the spindle turning without slipping or falling off the wheel.

Photo description: Double Nut New England Great Wheel set outside for a Founder’s Day demonstration. The cotton drive band runs around the wheel on the right then to the spindle post on the left.

All the wood screws on the wheel were in working condition, which is remarkable for 165 year old carvings. I was able to move the spindle post position in my quest to find the right alignment to keep her spinning for longer periods of time.

This post is part of a series about my experience demonstrating spinning on a 1860s Great Wheel in Mansfield Texas.

Spinning on a Great Wheel

On By CarynIn Craft

I had the absolute privilege of spinning on a Great Wheel from the 1860s.

Photo description: double nut New England Great Wheel dated to the 1860s and brought outside to demonstrate spinning for Founder’s Day in Mansfield Texas

The wheel is older than the house she lives in (any item that is 165 years old deserves a pronoun upgrade, in my opinion.) The wheel was used to spin cotton, which was a primary staple in Texas at the time. She was in a private collection for many years, but was placed in the Man House as an honorarium to her former spinner. It is an appropriate placement historically and a valuable display for visitors to see this wonderful piece of human-powered engineering. I was the first to spin on the wheel for ten years, if I have my stories straight, and it was a joy. I did spend an equal amount of time spinning, adjusting the wheel with field-expedient fixes, and talking about the wheel. I took with me Texas Coop cotton sliver and spun two cops of yarn over six hours.

I like to keep these posts relatively short for this blog, so I’m going to spread the deep dive into my spinning experience out over several days!