Author: Caryn

Basket experiment: Iris and Daylily

On By CarynIn Craft

I gathered dead leaves from the base of several iris and daylily plants at my folk’s house, along with some daylily stems. To make them flexible I wet a large towel and wrapped the leaves and stems with it, leaving them in the towel for a few hours.

Photo description: gathered materials laid out in an old terry cloth towel

I chose ten daylily stems for my base stakes and did a plain weave 5×5. I then twined iris leaves around the stakes, creating a square basket. To add a new leaf, I folded the old leaf end into the new leaf end, twisting them together to lock it in.

Photo description: basket in progress showing very long stakes and several twined rows

I still need to study how to do borders for the top. I ended up clipping the stakes short and tucking in the twined ends for this basket.

Photo description: twined basket with cut stakes
Photo description: side of twined basket
Photo description: bottom of twined basket

I left the basket at my folks’ place to dry. The leaves had spots of mold, so it shouldn’t be used for foodstuffs, but after a solid coat of sealer, it could be a desk basket.

Laser cutter

On By CarynIn Craft

I recently visited my folks, who have a new laser cutter, so I had to give it a go. I had sketched up a design before I visited of a new idea for a dishwasher magnet, then I got carried away filling the space with simple yarn shuttles, weaving needles, and even a drop spindle whorl.

Photo description: 1/8th inch plywood cutouts clockwise from top right: three yarn holders, two weaving needles, two 2-part dishwasher magnets, and a dragonfly spinning whorl on a wooden shaft (the shaft is from a different spindle)

The laser cutter is like a Cricut cutter, but on steroids. The cuts were smoother than I expected, and really don’t need clean up. The engraved dragonflies actually have some depth, which is neat. The dragonfly design is one of mine that I pulled from archives to test out (because I could). There is some learning curve, and experimentation with power and speed is necessary for the best results. It was overall a fun project. I do have some assembly and testing work ahead of me.

Fiber page: Pineapple fiber

On By CarynIn Craft

My fiber study page for my pineapple fiber sample is done!

Photo description: clockwise from top left: card from Hearthside fibers that says “Pineapple Top, Developed in the Philippines, Made from the leaf of the pineapple plant”, paper bobbins with single spun and 2-ply hand spun yarn, sprang swatch, crochet swatch, woven swatch, knit swatch, unspun fiber

The crochet round gave me fits with this fiber. I spun it so fine I was having trouble getting the right gauge for my regular coaster pattern. I think I ripped it apart three times. I ended up winging it, filling the space with stitches and numbers that fit.

Photo description: same page with the swatches flipped up to show hand written descriptions: “Sprang interlaced horizontal ribs chain finished”, “crochet”, “plain weave with sections of 2×2 twill”, “knit stockinette with garter stitch edges size 2 needles, Prym”

Throwback Thursday: Doodle Fish

On By CarynIn Craft, throwback

Here is a throwback to April 2017 when I used a 3Doodler 2.0 tool to sculpt a fish.

Photo description: “Hooked” fish sculpture created for my Dad for Father’s Day using the 3Doodler 2.0, about 50 sticks of PLA, two plastic safety eyes, and about 12 hours working time.

Dad displayed the fish on a clear acrylic shelf in an upper window. Here is a picture from 2024.

Photo description: same doodled fish seven years later on a hanging shelf with the woods behind the window glass. His lure went A.W.OL. probably cat related.

As much as I loved the idea of the 3Doodler, the entry level extruder pens could not keep up with my desired work flow. I burned out a couple pens experimenting, and they often needed frequent breaks in production, more than I did.

Wool goblin

On By CarynIn Cats
Photo description: Thor the cat with three articles of doll clothes in front of him, all made from wool

Thor the cat really likes wool. Awhile back we moved the gate keeping dogs out of the cat area and inadvertently removed the gap on the side that Thor used as a pass through. The gate was no problem for our two leaping female cats, but Thor is not a leaper. He can jump up, but for some reason doesn’t get that he can jump over. So he was blocked from the upstairs and our youngest’s room, which is full of wooly goodness. My eldest fixed his access by putting a stool on one side and a box on the other, giving him treats to entice him over. He learned, using supports, to get over and regained access to the treasure trove of doll clothes. He goes up, selects a wool item (always wool, never acrylic) and brings it downstairs. In the picture, the brown doll jacket in the middle was his latest prize, I threw the green doll shawl and pink doll sweater that he had previously brought down next to him for the picture. I could probably use him as a wool finder for fabric with unknown animal hair content.

P.S. he looks like a chonk, but the vet says Thor the cat’s weight is in the normal range.