Plying Jacob’s wool

All the singles I spun with my Jacob’s wool from Sweetgrass farms had sat on their bobbins for a few days, so it was time to ply! I put a makeshift brake on the bobbins on their stands on the wheel. I used a cotton string and applied enough tension so that the bobbins will turn, but not spin freely. This saves me from future tangles.

Photo description: three bobbins full of spun singles on an Ashford Traveller spinning wheel
Photo description: jumbo Ashford bobbin full of three-ply Jacob’s wool yarn
Photo description: left over dark and silver marled yarn with the middle bobbin empty
Photo description: three-ply yarn made with two dark singles and one silver single
Photo description: left over yarn from round two of plying
Photo description: four bobbins of three-plied Jacob’s wool yarn in four colors

I used the silver single spun with the remaining two bobbins of dark colored singles, then when the dark ran out, chain plied the silver. I ended up with two jumbo bobbins full of three-ply yarn, and two regular bobbins half-full of yarn.

I need my bobbins free, so this yarn doesn’t get to let time set the twist. Next up is the niddy noddy.