I’m developing my skills with the Ashford Traveller spinning wheel. I’ve found it helps me evenly distribute the yarn on the bobbin if I separate up my roving into thinner strips and switch hooks on the flyer after I spin each strip.
Photo description: four strips of roving laid out on my knee as I prepare to spin
Some spinners pre-draft their roving to make spinning easier, I find tearing off about 8-10 inches, then separating out sections has a similar function. Commercial roving is quite thick, and when spinning directly from a large bundle of fiber there is a tendency for the fibers to tangle, making it harder to spin consistently. Joining in a new strip is easier for me than untangling a mess of looped fibers, or managing a thick bundle.
Photo description: Ashford Traveller built-in Lazy Kate holding three evenly filled bobbins of single spun yarn
I now have three full bobbins of yarn and am ready to try plying with the wheel!
My neighbor was looking for a good home for her Ashford Traveller Double Treadle Double Drive spinning wheel. She bought it used from another crafter, but has her hands full of other projects and doesn’t have time to spin wool. She gave it to me and I took it home and gave it a good once over, wiping down parts and oiling bearings. I set it up as a single drive, Scotch tension, because I can with this wheel. As we get to know each other better, I’ll try out the double drive mode.
Photo description: back side of an Ashford Traveller Spinning Wheel with double drive and double treadle, produced between 1996-2012, drive band shown with tension released
I did make some adjustments to the drive path, which is super easy with two screws and slotted hinges inside the mother-of-all, which is the bar that holds the bobbin, flyer, maidens, and tensioners. This aligned the drive string with the wheel and made it easier to treadle. I tried out a bit of merino and alpaca blended roving, then found some more, and proceeded to spin on the wheel all day. (I did get up to take breaks, and actually address things in my to-do list.)
Photo description: mother-of-all opened to show the adjustable hinges on an Ashford Traveller spinning wheel
My Befra Willy spinning wheel has Irish tension (the brake is on the flyer instead of the bobbin), so the two wheels can live harmoniously together producing different kinds of yarn. My drop spindles are not jealous because they get to go on outings and are not dependent on a stable floor. Every item gets to keep its given name because that is the way I roll (I haven’t renamed a pet in over 20 years.) I know some spinners give their wheels individual names, as do some treadle sewing machine owners, as do boat owners if we get down to it. I’m rubbish at naming.
Critters and Craft 