My single spun mint top fiber has been sitting on my drop spindle for awhile. I spun it so thin I really was worried about it breaking during the plying process. I finally took a deep breath, got out my homemade spindle holder, and chain plied with my vintage Befra Willy spinning wheel.
I wet the yarn on the niddy noddy to set the twist. I’m still not feeling and “coolness” from the mint infused fibers. Maybe that will come once the yarn is made into fabric?
I’ve posted before about Howard Feed-n-Wax and how much I love it for the ease of use and beauty it imparts to wood. Here is another testimonial with my Befra Willy Spinning Wheel.
I did replace the hooks on the flyer assembly as well. They weren’t broken, but I have an idea about how to wind the spun yarn more smoothly and larger hooks may help. More on that later.
I finally combed and single spun the last of an alpaca fleece that I purchased and washed in 2020, and started spinning on my Befra Willy Spinning Wheel in 2022. I haven’t been spinning consistently over the last two years; there were many months that the fleece and the wheel were tucked away out of sight and definitely out of mind.
To free up my bobbin, because the next step is to give the wheel some TLC, I wound the yarn into a cake using my wool winder. I ended up with 196g of spun alpaca (the cardboard tube in the middle weighs 4g).
I put the cardboard tube in to keep the yarn under more tension. Single spun yarn is not balanced, and I wanted to reduce the chance of kinks and tangles. I’m not sure how I want to ply this fiber, so it will sit until I have an idea. I did pull the start of the yarn and the end to compare thickness, and I did a fair job keeping a consistent spin over the two year span. There are some thinner and thicker sections, but not a wide spread.
This definitely counts as a forever project. I’m really getting my crafting money’s worth from this alpaca fleece.
I’m still working on spinning the fawn-colored alpaca wool on my vintage Befra Willy spinning wheel. I’d like to get it finished up so I can give the wheel a good rub down with Howard’s Feed-n-wax, but apparently my fiber basket is bottomless. (Or I get distracted…)
Today’s distraction is an evenly wrapped bobbin. There are all sorts of devices out there designed to achieve a smooth wrap, rather than the bumpy wrap produced by the hooks on the flyer. A smoothly wrapped bobbin makes taking the yarn off the bobbin easier, with less potential for breakage.
I’ve been thinking on this, and noticed that I can turn my hooks and get a slightly different take up angle on the flyer. This helps a little, and if I did this from the beginning I would certainly be closer to that epitome of bobbin wrapping that seems to be so coveted.
I pulled out my spinning wheel and realized that it has been a long time since I spun with it. Thor the cat has never seen it in action and he is nine months old. Hm. He was quite fascinated with the process, and after this photo had to be told to knock it off as he went for the wheel and the yarn.
Critters and Craft 