I finally made a wooden Lazy Kate. I had grand schemes to make something fancy and practice making dovetails, but alas I need more practice and on something smaller and softer than the 1” cupped oak plank I tried! Still, I managed to salvage the wood, which is nice and heavy, to make a functional tool. A Lazy Kate is used to hold spindles full of single ply yarn so the spinner can ply easily. It really should be a Genius Kate, or a Work Smarter Not Harder Kate. Poor Kate. She and Susan probably have some grievances. Anyway, I cut notches in sides of the top and bottom pieces and then cut pegs that fit in the notches for the sides. The holes for the spindle shafts are at a 5 degree angle because I saw another design that tilted the spindles. I used the largest section of wood for the base for stability, and glued the whole thing together.

When the glue was dry, I did apply some wood filler to the gaps, and when that was dry sanded the whole thing first with an orbital sander, then by hand with 120 grit sandpaper. Before applying finish, I tested plying with it. I have seen another style with a loop to feed the threads through, so I tried that. Turns out it is easier not to use a loop. I also put a rubber mat under the base to keep it from sliding, which isn’t a bad idea, but the weight of the wood did a good job keeping it steady.

This is the best Lazy Kate I’ve made so far. It made plying easier as I didn’t have to fight the tool the whole time. The angle of the holes worked great, letting the spindles spin, but not spin out of control (I’ve seen other designs that use elastic or wrapped string to provide tension). Since it passed its test, I’ll give it a nice polyurethane clear finish!